Оценка безубыточных издержек стратегии на фьючерсах CME

# CME Futures: Transaction-Cost Sensitivity


# CME Futures: Transaction-Cost Sensitivity

This notebook prices one configuration: the one the case study ships, resolved
across labels from the immutable union of signal, allocation and risk-overlay results, with
its risk overlay carried rather than cleared. It then applies the declared all-in cost grid
to that fixed configuration. Commission and slippage each receive half of the grid value.

One curve, not one per horizon. The selected configuration sits on a single label, so the other
label produces no cost rows, and that is the intended state rather than a missing run.

Cost sensitivity is not a selection stage. Its rows are excluded from the final selection pool.
Contract multipliers, tick sizes, margin rates, front-contract position, roll adjustment, and
product identity remain unchanged across the grid.

## Why a strategy is priced rather than costed

Every backtest before this one traded for free. That is not an oversight being corrected
here - it is the only way the earlier comparisons could mean anything. A cost assumption
applied during selection silently picks the strategy that best suits *that assumption*, and
since nobody knows the true figure in advance, the result would be a configuration tuned to a
guess. Selecting frictionlessly and pricing afterwards keeps the two decisions separate and
visible.

So this notebook does not ask "what does the strategy earn after costs?" as though there were
one answer. It asks a more useful question: **at what cost level does the edge disappear?**
The grid is swept because that breakeven point, not any single net Sharpe, is what a reader
can compare against what they would actually pay.

### What the number covers

Each grid value is an all-in per-trade cost in basis points, split evenly between commission
and slippage. Those are different things and only the first is knowable in advance:

- **Commission** is the broker and exchange fee. It is a published number, it is small for
  liquid futures, and it does not depend on what the strategy does.
- **Slippage** is the gap between the price that triggered the decision and the price actually
  received. It depends on order size against available depth, on how quickly the position is
  built, and on whether the trade is demanding liquidity or supplying it. It is the larger and
  far less predictable half, and it is the reason a single figure has to be swept rather than
  assumed.

The even split between the two is a convention rather than a measurement, and it is worth
naming as one. Nothing here estimates the commission and slippage components separately, so
the split changes no result: the backtest charges the total. It exists so that the grid value
reads as an all-in figure a reader can compare against their own all-in figure, rather than as
a commission a reader might then add slippage to and double-count.

A flat rate across thirty products is a deliberate simplification, and a reader sizing real
positions should know which way it errs. Depth differs by orders of magnitude across this
universe - the equity index contracts absorb size that would move a livestock or lumber
contract several ticks - so one rate is optimistic for the thin products and pessimistic for
the deep ones. It is the right choice here because the alternative is a per-product model
whose assumptions would be doing more work than the measurement.

### Why turnover is what the cost multiplies

Cost is charged per unit traded, not per unit held, so what a grid value buys is entirely
decided by how much the strategy rebalances. Two configurations with identical gross returns
can sit far apart on these curves if one of them churns.

That gives this stage a second use beyond the headline breakeven. A signal whose edge survives
realistic costs is one whose ranking is stable enough that yesterday's positions are mostly
still today's; a signal that dies at a few basis points was earning its gross return by
trading constantly. The first is a strategy and the second is a description of a data
artifact, and no gross Sharpe distinguishes them.

### Why the risk overlay is carried rather than cleared

The selected configuration is priced with its risk overlay in place, because the overlay changes
the positions and therefore changes what is traded. Pricing a bare signal and then adding an
overlay afterwards would cost a strategy nobody runs. This matters more here than it would
elsewhere: an overlay that reduces position size in volatile periods also reduces turnover in
exactly the periods where slippage is worst, so stripping it out would misstate the cost in a
direction that flatters the strategy.

```python
"""Run CME futures transaction-cost sensitivity on fixed configurations."""

import json

from case_studies.cme_futures.research_workflow import (
    ALL_LABELS,
    open_study,
    product_universe_table,
    run_official_backtest_requests,
    strategy_request_frame,
)
from case_studies.research.population import supersedes_for_run
from case_studies.utils.strategy_analysis import resolve_solvent_carrier
from case_studies.utils.sweep_config import get_cost_grid_bps
```

```python
EXECUTION_TIER = "canonical"
WORKSPACE: str | None = None
PREVIEW_LABELS: list[str] = []

# The cost population is immutable under its name, so a run whose members have moved has to say
# which generation it retires. Anything upstream that changes a backtest identity moves them - a
# corrected label, a changed accounting field, a re-run after a registry reset - and
# `OfficialPopulation.create` refuses to write a different member list under a name that already
# exists. Declared as a literal so that running the committed notebook as it stands recomputes
# the population on record. Empty for a first snapshot.
COST_POPULATION = "cme_futures-cost-validation-v1"
SUPERSEDES_COST_POPULATION: str = ""
```

## Fixed inputs

There is one configuration to price, and the shared selector below decides which
label it is on. `PREVIEW_LABELS` is still validated rather than ignored: a preview run
that names a label the case study does not declare is a mistake worth stopping, even
though nothing here loops over the set.

```python
study = open_study(execution_tier=EXECUTION_TIER, workspace=WORKSPACE)
if EXECUTION_TIER == "canonical":
    if PREVIEW_LABELS:
        raise ValueError("canonical execution cannot declare preview reductions")
elif EXECUTION_TIER == "preview":
    if WORKSPACE is None or not PREVIEW_LABELS:
        raise ValueError("preview execution requires WORKSPACE and PREVIEW_LABELS")
    unknown = sorted(set(PREVIEW_LABELS) - set(ALL_LABELS))
    if unknown:
        raise ValueError(f"preview labels this case study does not declare: {unknown}")
else:
    raise ValueError(f"unsupported execution tier: {EXECUTION_TIER!r}")
universe = product_universe_table()
universe
```

```python
cost_grid = get_cost_grid_bps("cme_futures")
if not cost_grid:
    raise ValueError("the configured cost grid is empty")

# The configuration this case study reports, resolved once by the shared selector rather
# than ranked again here. `resolve_solvent_carrier` goes through
# `resolve_canonical_rank1_lineage`, which ranks across the signal, allocation and
# risk-overlay stages together, re-ranks conformal candidates on exact common timestamp
# support and applies LABEL_RESTRICTIONS, UNIVERSE_RESTRICTIONS and CARRIER_PINS. A plain
# Sharpe ranking beside it does none of those, and where the two disagree this notebook
# prices a strategy the chapter does not report while `19_strategy_analysis` finds no cost
# rows for the configuration it selected. It also refuses a configuration whose equity reached zero,
# whose Sharpe would be computed on a balance that no longer exists.
#
# This replaces a per-label loop that ran a cost grid for each label off the pre-overlay
# allocation results. That was wrong twice over: there is one strategy, not one per label,
# and it read the stage before risk management, so the ladder priced the pre-overlay winner
# rather than the configuration that is actually shipped.
carrier = resolve_solvent_carrier("cme_futures")
strategy = json.loads(carrier["spec_json"])["strategy"]
selected_label = carrier["label"]
prediction_hash = carrier["val_prediction_hash"]
print(
    f"Pricing the canonical validation rank-1: {carrier['val_backtest_hash']} "
    f"({carrier['family']}/{carrier['config_name']}) on {selected_label}, "
    f"from the {carrier['val_stage']} stage, validation Sharpe {carrier['val_sharpe']:.3f}, "
    f"max drawdown {carrier['max_drawdown']:.3f}."
)
print(
    f"  It carries {'a' if strategy.get('risk') else 'no'} risk overlay, and that block "
    "travels with it below rather than being cleared."
)

request_rows = []
for total_cost_bps in cost_grid:
    request_rows.append(
        {
            "request_name": f"{carrier['val_backtest_hash']}-cost-{total_cost_bps:g}",
            "prediction_hash": prediction_hash,
            "label": selected_label,
            "signal": strategy["signal"],
            "allocation": strategy.get("allocation"),
            # Carried, not cleared. The configuration being priced is the one that came out
            # of risk management, and dropping its overlay here would price a strategy
            # nobody selected.
            "risk": strategy.get("risk"),
            "costs": {
                "commission_bps": total_cost_bps / 2,
                "slippage_bps": total_cost_bps / 2,
            },
            "chapter": "ch18",
        }
    )
requests = strategy_request_frame(request_rows)
requests.select("request_name", "prediction_hash", "label", "costs")
```

## Execute the declared grid

Expected identities are snapshotted before execution. An empty input, failed grid member, missing
sidecar, or incomplete lineage fails the notebook instead of reporting a smaller population.

Failing rather than reporting a smaller population is the important half of that sentence. A
cost curve with a missing point still plots, and it plots as a curve that bends somewhere it
does not really bend - so the one output a reader would take a breakeven from is exactly the
one that hides an incomplete run. There is no partial answer to this question worth having.

The results are written as a named population for the same reason the baseline sweep is, and
`SUPERSEDES_COST_POPULATION` above is how a re-run says which generation it retires. A cost
curve is quoted in the chapter, so the set of backtests behind a quoted number has to stay
recoverable after the numbers move.

```python
execution = run_official_backtest_requests(
    study,
    requests,
    population_name=COST_POPULATION if EXECUTION_TIER == "canonical" else None,
    supersedes=supersedes_for_run(
        study,
        population_name=COST_POPULATION,
        declared=SUPERSEDES_COST_POPULATION or None,
        execution_tier=EXECUTION_TIER,
    ),
)
```

`source` says whether each member was computed by this run or served from the registry because
an identical identity was already recorded. A re-run of a registered sweep is entirely `reused`
and completes in seconds; without the column that is indistinguishable from having computed
every row.

```python
execution.catalog_rows.sort("label", "request_name")
```

`19_strategy_analysis` may describe the cost curve, but these backtests do not participate in
configuration selection.

## Reading the curve

The quantity to take from this notebook is the cost level at which the net Sharpe reaches
zero, not the net Sharpe at any particular level. That breakeven is a property of the
strategy; the figure a given reader pays is a property of their broker, their size and their
execution, and only they know it.

Two failure modes to keep apart when reading it. A strategy that breaks even far above any
plausible cost is genuinely robust to friction. A strategy that breaks even just above the
plausible range is not "profitable but tight" - it is a strategy whose result depends on an
assumption nobody can pin down, and the honest description of it says so rather than quoting
the frictionless number with a footnote.

What this stage cannot tell you is the cost of trading at a size the market notices. Every
figure here is linear in turnover: doubling the position doubles the cost. Real slippage grows
faster than that once an order is large against available depth, so the curve is a lower bound
on what scale costs, and the point where it crosses zero is optimistic for anyone trading
size. Nothing in this case study measures market impact, and reading the breakeven as a
capacity limit would be reading it for something it does not contain.